多肉植物黏性培養土 黏性土 塑型土

多肉植物黏性土 培養土 ,想在各種容器裡種植多肉植物、上牆吊飾、DIY活動都適合的可塑形培養土，讓植物盆栽組盆有更多可能。

可塑形培養土 塑型土 多肉植物扦插 多肉黏土 植物椰纖 花泥 有黏性可塑造形狀的椰纖混合土 多肉介質 1L裝

中華民國專利證書號M658090

塑形培養土 1升
內容物：椰纖土、蛭石、鹿沼土、珍珠石、水性黏著劑
重量：約150g

使用方法：分批分次加入少量水，等待約10分鐘讓土壤充分吸水，每袋約使用300ml水，攪拌產生黏性即可塑形。

注意事項：水份過多會讓土壤液化過軟，水份過少黏性較差，定型後水份揮發即變硬，可以在3小時內進行扦插植物，三天後可以使用噴霧器對植栽加濕，扦插植物約2週發根定型，日後可以土乾澆水或盆栽泡水。

產品說明：

多肉植物黏性培養土與水混合後變硬的特質，增加了多肉植物種植時固定及增加更多造型，可以做為植物立體種植的可能。

因此您可以將多肉植物像相框一樣種植掛到牆上，或者將多肉植物黏性培養土粘貼到木板、造型花盆的表面來增加更多造型。

PS: 多肉植物黏性培養土不適用玻璃等光滑表面上。

你可以在以前不可能的地方和產品上種植多肉植物，讓多肉植物黏性培養土來擴大你的設計範圍，同時您可以享受多肉植物作為時尚的裝飾或成為藝術品。

多肉植物黏性培養土硬化後，澆水並不會坍塌，在植物葉片上噴霧澆水或用水慢慢浸泡盆器來增加水份。

檢查多肉植物是否缺水嗎？當看到葉片軟化即可進行水份的補充，扦插後的底部葉片黃化或萎縮是正常的，這是多肉植物發根期間的營養提供。

多肉植物黏性培養土，輕鬆種植立體植物。

你在花店裡看過立體種植的多肉植物盆栽嗎？ 但是如果你使用多肉植物黏性培養土來製作盆栽，那麼您將可以獲取更多植物盆栽的設計風格。

首先多肉植物黏性培養土適當加水，拌勻，把準備好的多肉植物摘取底部的葉面，留下約1cm左右的莖，再將扦插的多肉植物莖部牢牢地插進去，土乾了植物就會定型。

如果您種植的盆器是由表面不平坦的材料製成的，例如：木材、陶瓷、塑料，多肉植物黏性培養土可以黏上去，因此根據您的想像力，您可以將它們種植在各種不同的地方或物品上。

當多肉植物黏性培養土乾燥後會變硬，因此即使你給它澆水也不會恢復到原來光滑的土壤狀態。澆水時，水需要一段時間才能浸透，使用水盤浸泡盆栽底部約10分鐘，檢查植物的葉面來判斷是否需要澆水，可以經常使用噴壺噴灑在植物及土壤表面。

享受多肉植物作為綠色室內裝飾和創造藝術品創造了多種可能性！

每箱24入，每包尺寸約為 17*24*4cm.

黏性培養土常見問答？

可以澆水嗎？會不會坍塌？

乾燥後的幾個小時後（視用量多寡）可以用水澆不會坍塌，但是沖水的力道可能造成扦插的植物脫落，建議前兩週植物未發根前僅使用噴霧噴壺來加濕植物及培養土即可，土壤中的水分對於未發根的植物沒有什麼幫助。

土壤會不會過硬造成植物無法生長？

黏性培養土採用椰纖、鹿沼土、蛭石及珍珠石為主要配方，疏鬆透氣且控制了適合植物的PH弱酸性，植物的生長發根並不會受到太大的影響。

土壤可以重複使用嗎？

如果將乾燥後的土壤壓碎分解後，重新混合水份仍會有部份黏性，隨著混合水份的流失黏性也會跟著降低，可以部份混合新的黏性培養土繼續使用。

用不完的黏性培養土如何保存？

未添加水份的黏性培養土可以使用原本的密封夾鏈保存，如果已混合水份的培養土需要密封保存，並適當在完全乾燥前使用完畢。

黏性培養土添加什麼樣的水混合？

使用自來水混合黏性培養土即可，混合的最佳比例為 1:2，150g重的黏性培養土，添加300cc清水即可產生黏性，如果黏性不足可以再增加水量，過多的水量會造成黏性土無法定型，適當添加即可，過量的水需要對應添加更多的乾燥的黏性培養土來定型。

黏性培養土有添加肥料嗎？

培養土中僅含控制酸鹼的礦物質及適合植物生長的椰纖土，不含肥料，適當使用水溶性肥料噴灑或浸泡盆器會對植物生長有幫助。

黏性培養土的使用場景？

在不易固定植物的牆面、木塊、塑膠、需要立體裝飾的設計都可以使用黏性培養土，塑料、陶、瓷花盆都很合適吧，對於大面積的景觀設計，可以將黏性培養土做為鋪面固定植物使用，鋪面深度約為2cm即可固定植物。

是不是適用所有植物呢？

這個比較像固定植物的鋪面土，多肉植物因為葉片可以供應養份，我們想做立體的盆栽裝飾合適，您如果是種觀葉或是些水份需求大的，可以使用田園土更適合，這個是多肉、仙人掌等水份需求少的的植物比較合適。

Adhesive Culture soil for succulents

Product Details:

Item Weight: 150g

Applications: Succulents, etc

Item Volume: 1 Liter

Main ingredients:Coco Coir 、Kanuma Soil、Perlite、Vermiculite、Water-based Adhesive.

Product Dimensions: 17*24*4cm

How to use: Add a small amount of water in batches to the Adhesive Culture soil , wait for about 10 minutes for the soil to fully absorb water, use about 300ml of water for 1 Liter soil.

Note: Too much water will make the soil liquefied and too soft. Too little water will make the soil less viscous. After it is set, the water will evaporate and become hard. You can cut plants within 3 hours. After three days, you can use a sprayer to humidify the plants. It takes about 2 weeks for the cuttings to take root and take shape. In the future, they can be dried in soil and watered or the potted plants can be soaked in water.

Product Description:

Adhesive Culture soil that hardens when mixed with water increases the possibility of fixing and adding more shapes when planting succulent plants, and can be used as a three-dimensional planting of plants.

Therefore, you can plant succulents and hang them on the wall like a picture frame, or stick the Adhesive Culture soil to the surface of wooden boards or shaped flower pots to add more styling.

PS: The Adhesive Culture soil for succulents is not suitable for use on smooth surfaces such as glass.

If the pots you plant are made of materials with uneven surfaces, such as wood, ceramics, or plastic, Adhesive Culture soil can stick to them, so you can plant them in a variety of different locations according to your imagination. on a place or object.

Adhesive Culture soil for succulents hardens when it dries, so it won’t return to its original smooth soil state even if you water it. When watering, it will take some time for the water to soak in. Use a water tray to soak the bottom of the pot for about 10 minutes. Check the leaves of the plant to determine whether watering is needed. Use a watering can frequently to spray the plant and soil surface.

Enjoying succulents as green interior decoration and creating art opens up so many possibilities!

Adhesive Culture Soil for Succulents is a planting medium specially designed for certain planting needs, commonly made from a mix of materials like coco coir, Kanuma soil, vermiculite, and perlite. This type of soil has specific stickiness, making it very suitable for fixing plants in scenarios like walls, wood, or plastic. Here are some common questions and answers about Adhesive Culture Soil for Succulents:

1. **Watering Issues**: Adhesive Culture Soil for Succulents can be watered without collapsing a few hours after drying. However, care should be taken with the force of watering to avoid affecting the cuttings. For the first two weeks before the plants root, it’s recommended to use a spray bottle for moistening.

2. **Soil Hardness**: The formula of Adhesive Culture Soil for Succulents is loose and breathable, maintaining a weakly acidic pH suitable for plant growth, so it won’t be too hard to hinder plant growth.

3. **Reuse**: The dried soil can be crumbled and reused, but its stickiness will decrease with the loss of moisture. It’s advisable to mix it with new Adhesive Culture Soil for Succulents.

4. **Storage Method**: Unhydrated Adhesive Culture Soil for Succulents can be stored sealed in its original packaging. If mixed with water, it needs to be sealed and used up before completely drying.

5. **Adding Water**: Mix with tap water in a recommended ratio of 1:2 (150g of soil to 300cc of water). Adjust the amount of water appropriately; excess water requires the addition of more dry soil.

6. **Fertilizer Content**: Adhesive Culture Soil for Succulents does not contain fertilizer but does include minerals for pH control and coconut fiber soil suitable for plant growth. Nutrients can be provided through water-soluble fertilizers.

7. **Usage Scenarios**: Suitable for scenarios requiring plant fixation, such as walls, wood, plastic, and three-dimensional decorations, as well as plastic and ceramic pots. For large-scale landscape designs, it can be used as a surface layer, with a depth of about 2cm.

8. **Suitable Plants**: More appropriate for succulents, cacti, and other plants with less water needs. Leafy plants or those with higher water demands might be better off with garden soil.

Adhesive Culture Soil for Succulents is designed to be an ideal choice for specific planting environments, especially for three-dimensional or creative potting decorations.